DENTEC WDR-516S Guide d'installation

WDR-516S Installation Guide

WDR-516S Installation Guide 10 Rev 1.0(93/11) WDR-516S Rear (7) Power switch (8) Ethernet connector (9) BNC connector for Video input (10) Audio

WDR-516S Installation Guide 11 Rev 1.0(93/11) INSTALLATION AND CONNECTION 4. Connecting & Running WDR-516S 4.1. Connecting camera (1) Con

WDR-516S Installation Guide 12 Rev 1.0(93/11) 4.2. Connecting Monitor (1) Connect CCTV monitor to WDR-516S with BNC cable as shown below.

WDR-516S Installation Guide 13 Rev 1.0(93/11) 4.4. Supplying Power (1) Connect power cable to WDR-516S. (2) Turn on the power switch located o

WDR-516S Installation Guide 14 Rev 1.0(93/11) 5. Running OSD menu 5.1. Using menu Press the [MENU] button to open the OSD Configuration Men

WDR-516S Installation Guide 15 Rev 1.0(93/11) 5.2. Dialogue Box to Edit a Word There are two methods to set word. (1) Using number button Ent

WDR-516S Installation Guide 16 Rev 1.0(93/11) 6. Setting remote controller 6.1. Setting remote control DIP switch Set the remote control DIP sw

WDR-516S Installation Guide 17 Rev 1.0(93/11) (3) Select “Miscellaneous” from the sub-menu list using the [▼] button and press the [ENETR] butto

WDR-516S Installation Guide 18 Rev 1.0(93/11) WDR 6.4. Operable range of remote controller 6.5. Loading the batteries into remote controller

WDR-516S Installation Guide 19 Rev 1.0(93/11) 7. WDR-516S Configuration 7.1. Basic Configuration 7.2. Advanced Configuration

FCC Compliance Statement Caution : Any changes or modifications in construction of this device which are not expressly approved the party responsi

WDR-516S Installation Guide 20 Rev 1.0(93/11) 7.3. External Storage & Backup Configuration 7.4. Internet/Intranet Configuration WDR

WDR-516S Installation Guide 21 Rev 1.0(93/11) 8. WDR-516S Basic Setting 8.1. Viewing Image After initial start-up, images from Ch.1~4 are displ

WDR-516S Installation Guide 22 Rev 1.0(93/11) 8.2. Setting Date & Time (1) Press [MENU] button, and select “Quick Setup” tab. (2) Select “

WDR-516S Installation Guide 23 Rev 1.0(93/11) 8.2.3. Time Format (1) Select “Time Format” using the [◄ or ►] or the [▲/▼] buttons and press [ENTE

WDR-516S Installation Guide 24 Rev 1.0(93/11) 8.3. Setting Recording Condition Recording conditions under the “Quick Setup” menu tab apply the

WDR-516S Installation Guide 25 Rev 1.0(93/11) (1) Press [MENU] button, and select “Quick Setup.” (2) Move to sub-menu by pressing [ENTER] or the

WDR-516S Installation Guide 26 Rev 1.0(93/11) 8.3.5. Quality When “Recording Speed/Quality” is set as “Custom,” values can be set manually. (1)

WDR-516S Installation Guide 27 Rev 1.0(93/11) 9. Connecting and Configuring Sensor 9.1. Connecting Sensor Input To connect a sensor to S1, fix

WDR-516S Installation Guide 28 Rev 1.0(93/11) 9.2. Setting Sensor at OSD menu After a sensor is connected, it can be activated through the OS

WDR-516S Installation Guide 29 Rev 1.0(93/11) 10. Connecting & Configuring Relay Out 10.1. Connecting Relay Out WDR-516S has total four

Important Notice 1. Do not place heavy objects on the top of the WDR-516S. 2. WDR-516S is not weatherproof. In case of outdoor use, equip a weat

WDR-516S Installation Guide 30 Rev 1.0(93/11) 10.2. Configuring Relay Out Each relay can be synchronized with a sensor input or with motion dete

WDR-516S Installation Guide 31 Rev 1.0(93/11) 11. Connecting External Device with Serial Port 11.1. Connecting Text Input Device (ATM / POS / Ac

WDR-516S Installation Guide 32 Rev 1.0(93/11) 12. Connecting & Configuring Serial Ports for Pan/Tilt/Zoom 12.1. Connecting Serial Port The W

WDR-516S Installation Guide 33 Rev 1.0(93/11) 12.2. Configuring Serial Port Configure PTZ serial ports and available modes at “System / Serial S

WDR-516S Installation Guide 34 Rev 1.0(93/11) <Note> Wire Handling Trimming Wire When connecting a wire to a terminal block, follow t

WDR-516S Installation Guide 35 Rev 1.0(93/11) If properly connected, the disk is recognized automatically as in the following picture. To copy

WDR-516S Installation Guide 36 Rev 1.0(93/11) 14. Connecting External Storage 14.1. IEEE1394 Bay WDR-516S has three IEEE1394 ports for extern

WDR-516S Installation Guide 37 Rev 1.0(93/11) 14.4. Registering & Formatting HDD “Disk Manager” will automatically run on start-up after i

WDR-516S Installation Guide 38 Rev 1.0(93/11) (8) Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[R]”

WDR-516S Installation Guide 39 Rev 1.0(93/11) 15.2. Configuring WDR-516S’s Network Information The following description is on based on Ethernet

WDR-516S Installation Guide 4 Rev 1.0(93/11) OVERVIEW...

WDR-516S Installation Guide 40 Rev 1.0(93/11) 16. Using WDR Manager 16.1. PC System Requirements for running WDR Manager Minimal Requireme

WDR-516S Installation Guide 41 Rev 1.0(93/11) (4) Select which components to install and press the “Next” button. (5) Browse and choose a direc

WDR-516S Installation Guide 42 Rev 1.0(93/11) 16.1.2. Uninstalling WDR Manager (1) Click Windows “Start” Button. (2) Select and Click ‘Unins

WDR-516S Installation Guide 43 Rev 1.0(93/11) 16.3. Monitor Click the related icon and run the “WDR Manager Monitor” program. 16.4. Playbac

WDR-516S Installation Guide 44 Rev 1.0(93/11) APPENDIX APPENDIX

WDR-516S Installation Guide 45 Rev 1.0(93/11) Appendix #1 Installing and Replacing internal HDD Compatible HDD It is recommended to use the fo

WDR-516S Installation Guide 46 Rev 1.0(93/11) <Note> The dip switch should be set at ‘MASTER’ position for the first installed or buil

WDR-516S Installation Guide 47 Rev 1.0(93/11) (5) Fix the HDD with provided screws. Connect power and data cables to HDD Installing single HDD I

WDR-516S Installation Guide 48 Rev 1.0(93/11) (8) Assemble the top cover. Registering & Formatting HDD “Disk Manager” will automaticall

WDR-516S Installation Guide 49 Rev 1.0(93/11) (11) Select “Action” using [▲/▼] button and press [EXIT] button. (12) Select “Add” using [◄ or ►]

WDR-516S Installation Guide 5 Rev 1.0(93/11) 8.2.2. Daylight Saving...

WDR-516S Installation Guide 50 Rev 1.0(93/11) Appendix #2 Video Input Video type / impedance setup switch It’s possible to set up Impedance of

WDR-516S Installation Guide 51 Rev 1.0(93/11) Appendix #3 Using CD-ROM Components of CD- ROM disc Installation Guide : WDR-516S Installatio

WDR-516S Installation Guide 52 Rev 1.0(93/11) Appendix #4 Specification General CPU 32bit RISC Processor (200MIPS) Flash Memory 8MB Main Memo

WDR-516S Installation Guide 53 Rev 1.0(93/11) Display Monitoring Max. 120ips (Analog Video 60ips) (IP Video 60ips) Viewer 1ch, 4ch,

WDR-516S Installation Guide 55 Rev 1.0(93/11) PTZ Control Serial Port RS232(1), RS485/422(1), RS232(1) Control Method (Local) Front panel butt

WDR-516S Installation Guide 55 Rev 1.0(93/11) Mechanical Dimension (WⅹDⅹH) 350ⅹ298ⅹ66(mm) Weight 3.5Kg (With one HDD) WDR- 516SNetwork Matri

WDR-516S Installation Guide 56 Rev 1.0(93/11) Model： WDR-516S Warranty： Full 1 year as of invoice shipping date Manufacture

WDR-516S Installation Guide 6 Rev 1.0(93/11) 14.3. Available HDD...

WDR-516S Installation Guide 7 Rev 1.0(93/11) OVERVIEW 1. What is WDR-516S? The WDR-516S is a 4-Analog, 12-IP channel network digital video rec

WDR-516S Installation Guide 8 Rev 1.0(93/11) 2. Supplied Accessories Unpack and check all the items as below. 1. WDR-516S (1) 2. DC Power Supp

WDR-516S Installation Guide 9 Rev 1.0(93/11) 3. Description & Function WDR-516S Front (1) LED (2) IEEE1394 connecter (3) Remote controlle